Configuring strap length and printing |
JetScan
®
MPX 8200 strapping and corner module
| 11
Configuring strap length and printing
See the JetScan MPX 8200 operating instructions for complete information on
system setup.
To tighten or loosen strap length
,
set bin limits
and set facing:
1. Press the
Menu
tab on the main-processing screen.
2. Press
Setup
on the
Menu
tab screen.
3. Press
Configure Sort Modes
and then press the
desired sort mode button
to
prompt a
Configure Sort Mode
screen, as shown below.
4. Press the
Limits
tab to:
a. Tighten or loosen strap length, depending on note
condition. This is helpful when sorting notes of
different ages and quality (new brick vs. older/highly
used). Press
+
to increase strap length; press
–
to
decrease strap length. Strap length can be different
for each strapping module. To return all strap lengths
to factory settings, press
Default
.
Adjusting the strap length is a trial-and-error
process. Straps that are too tight may break. When
straps are too loose, documents may slip out when
the strap falls into or is removed from the collection bin.
3 strapping
modules
4a
4b
4c
4d
4
5a
5
4
-
2
