CTS FWR5-3105 Series, Руководство пользователя

Страница: 60 / 179

60
port-link:
A trap will be sent when the link
is up or down.
power-down: A trap will be sent when the
power is off.
warm-start:
A trap will be sent when the
device restarts.
No command
Gateway(config)# no
snmp-server trap-type [all |
auth-fail | cold-start | port-
link | power-down | warm-
start] [all | auth-fail
| case-fan |
cold-start |
port-link |
power-down |
warm-start] Specify a trap type that will not be sent
when a certain situation occurs.
Show command
Gateway(config)# show snmp-server
community Show community configuration.
Gateway(config)# show snmp-server trap-
destination Show trap destination configuration.
Gateway(config)# show snmp-server trap-
type Show the current enable/disable status of
each type of trap.
Trap-type example
Gateway(config)# snmp-server trap-type
all
All types of SNMP traps will be sent.
2.5.12 Syslog Command
Syslog command Parameter Description
Gateway(config)# syslog Enable system log function.
Gateway(config)# syslog
level [emergency | alert |
critical |error | warning |
notice | info | debug] [emergency
| alert |
critical |
error |
warning |
notice | info
| debug] Select one of the syslog levels. The
Residential Gateway will record log events at
the chosen level and above. For example, if
you choose
Error , “error”, “critical”, “alert”
and “emergency” events will be recorded.
Emergency: System is unusable.
Alert: Emergent actions that must be
taken immediately.
Critical: Critical conditions.
Error: Error conditions.
Warning: Warning conditions.
Notice: Normal but significant conditions.
Info: Keep informational events message.
Debug: Debug-level messages are
logged.