CTS FWR5-3105 Series, Руководство пользователя

Страница: 65 / 179

65
•
Run a Web browser and specify the Residential Gateway’s IP address to reach it. (The
default IP of Residential Gateway is “192.168.0.1” before any changes.)
•
Login to the Residential Gateway to reach the Main Menu.
Once you gain the access, a Login window appears like the following:
Enter the authorized user name and password then click
“Login” . The default user name is
admin and without a password (leaves this field blank).
After a successful login, the following Residential Gateway Main Menu screen appears.
NOTE: By default, the remote access to the Residential Gateway is disabled. If you would
like to login the Residential Gateway from WAN port or ports assigned in Bridge Mode, you
must create a management interface in Basic Setup under the Setup Menu Bar and
enable it. Then, specify the IP address (if necessary) of the management computer and
specify Http port number for remote login in Device Access under the Administration
Menu Bar. Once completed, you can type in the IP address of the WAN management
interface and Http port number in URL field of your web browser like this
“192.168.1.198:8888” to access to web management.