CTS FWR5-3105 Series, Руководство пользователя

Страница: 13 / 179

13
[-t timeout (1-
99)secs] (optional)
[-r repeat (1-99)
times] Enter the repeat value that how many times
should be pinged.
[-t timeout (1-99)
secs] Enter the timeout value when the specified IP
address is not reachable. (optional)
Example
Gateway> ping 8.8.8.8
Gateway> ping 8.8.8.8 –s 128 –t 10
2.3.2 Traceroute Command
Traceroute is used to trach the path between the local host and the remote host. Enter the
traceroute command in User mode. In this command, you can add an optional max hops value
for the number of hops that packets are sent and received.
Command Parameter Description
Gateway >
traceroute [A.B.C.D
| URL] [-h 1-100]
hops [-t 1-99] secs [A.B.C.D | URL] Enter the IP address that you would like to ping.
[-h 1-100] hops Specify max hops between the local host and the
remote host
[-t 1-99] secs Specify timeout time in second
Example
Gateway > traceroute 8.8.8.8
Gateway> traceroute 8.8.8.8 –h 30
2.4 Privileged Mode
The only place where you can enter the Privileged (Enable) mode is in User mode. When you
successfully enter Enable mode (this mode is password protected), the prompt will be changed to
Gateway# (the model name of your device together with a pound sign). Enter the question mark (?)
or help command to view a list of commands available for use.
Command Description
configure Enter Global Configuration mode.
copy-cfg Restore or backup configuration file via FTP or TFTP server.
disable Exit Enable mode and return to User Mode.
exit Exit Enable mode and return to User Mode.
firmware Allow users to update firmware via FTP or TFTP.
help Display a list of available commands in Enable mode.
history Show commands that have been used.
logout Logout from the Gateway.
ping Test whether a specified network device or host is reachable or not.
reload Restart the Gateway.
show Show a list of commands or show the current setting of each listed command.
traceroute Trace the route to HOST.
write Save your configurations to Flash.
2.4.1 Copy-cfg Command
Use “copy-cfg” command to backup a configuration file via FTP or TFTP server and restore the
Gateway back to the defaults or to the defaults but keep IP configurations.