114
Source IP Range
—
Specify an IP address range for the LAN filter to block packets
whose source IP addresses are in this range.
Destination IP
—
Specify an IP address range for the LAN filter to block packets whose
destination IP addresses are in this range.
Dest. Port
—
Specify the destination port number of the packets which the LAN Filter will
block.
Protocol
—
Select
TCP
or
UDP
in the pull-down menu as the communication protocol of
the packets which the LAN filter will block.
Actions
—
Click
Add New LAN Filter
to add a new rule to the table after you configure it
in the text boxes. Then, click
Check Icon
to submit the new settings. If you need to
remove any entry from this table, click
Cross Icon
.
MAC Filter
This section allows you to edit the rule table for the LAN filter. The LAN filter will
block packets which are received by the Residential Gateway from the private network and match
the pre-determined condition of any entry in the rule table. Below is a description for each column
of this table.
This section allows you to edit the MAC filter rules in the table. The Residential Gateway will drop
packets which match the pre-determined condition of any entry in this table. Below is a description
of each column in this table.
Enable
—
Select the checkbox if you want to enable this rule.
MAC Address
—
Specify the MAC address of the packet which will be denied by this
rule.
Содержание FWR5-3105 Series
Страница 1: ...1 FWR5 3105 Series Residential Gateway Network Management User s Manual Version 0 93...
Страница 170: ...170...