CTS FWR5-3105 Series, Руководство пользователя

Страница: 38 / 179

38
mac-address
Show Command
Gateway(config-wlan2-ssid-
No.)# show Shows the current status of the SSID.
Gateway(config-wlan2-ssid-
No.-mac-filter-rule-No.)#
show Display the SSID’s current status of MAC filter
configuration.
2.5.6 IP Command
1. Set up DDNS service.
DDNS stands for “Dynamic Domain Name Service”. It allows a host to bind with a permanent
domain name so the host can be found on the internet with this domain name. With DDNS, the
network administrator can access the Residential Gateway with a permanent domain name even if
it is often assigned different IP addresses by DHCP. And users on the Internet can access the
server (such as the web service) on the private network by the domain name of the Residential
Gateway. They do not have to access the server by an IP address which is usually not as easy to
remember as a domain name.
IP command Parameter Description
Gateway(config)# ip ddns Enable the DDNS service.
Gateway(config)# ip ddns
[dyndns|noip.org] [dyndns|noip.org] Select a registration server to which you already
registered a domain name.
Gateway(config)# ip ddns
host-name Enter the DDNS URL assigned by the DDNS
server.
Gateway(config)# ip ddns
password Enter the password provided by the DDNS
server.
Gateway(config)# ip ddns
username Specify the username provided by the DDNS
server.
No command
Gateway(config)# no ip ddns Return DDNS to be disabled.
Gateway(config)# no ip ddns host-name Clear the host name.
Gateway(config)# no ip ddns password Clear the password.
Gateway(config)# no ip ddns username Clear the username.
Show command
Gateway(config)#show ip ddns Show the current DDNS configurations or verify
the DDNS settings.
2. Set up an IP address of the Gateway or configure the Gateway to get an IP address
automatically from DHCP server.
IP command Parameter Description
Gateway(config)# ip lan-
ip [A.B.C.D] [255.X.X.X] [A.B.C.D] Enter the desired IP address for your Gateway.
[255.X.X.X] Enter subnet mask of your IP address.
Gateway(config)# ip dhcp
server Enable DHCP mode.