71
Switch(config-vlan-10,20)# name Sales
Enater name for VLAN 10 and 20
Switch(config-vlan-10,20)# exit
Exit VLAN 10 and 20
Switch(config)# vlan dot1q-vlan 30,40,50
Enter VLAN 30,40 and 50
Switch(config-vlan-30,40,50)# name RD
Enater name for VLAN 30,40 and 50
Switch(config-vlan-30,40,50)# exit
Exit VLAN 30,40 and 50
Switch(config)# vlan dot1q-vlan 60
Enter VLAN 60
Switch(config-vlan-60)# name SQA
Enater name for VLAN 60
Switch(config-vlan-60)# exit
Exit VLAN 60
Switch(config)# vlan dot1q-vlan 70
Enter VLAN 70
Switch(config-vlan-70)# name PME
Enater name for VLAN 70
Switch(config-vlan-70)# exit
Exit VLAN 70
2.6.24 Interface Command
Use
“interface” command to set up configurations of several discontinuous ports or a range of
ports.
1. Entering interface numbers.
Command
Parameter Description
Switch(config)# interface
[port_list]
[port_list]
Enter several port numbers separated by
commas or a range of port numbers.
For example: 1,3 or 2-4
Note : You need to enter interface numbers first before issuing below 2-15 commands.
2. Enable port auto-negotiation.
Command
Parameter Description
Switch(config-if-PORT-PORT)#
auto-negotiation
Set the selected interfaces
’ to auto-
negotiation. When auto-negotiation is
enabled, speed configuration will be
ignored.
No command
Switch(config-if-PORT-PORT)#
no auto-negotiation
Set auto-negotiation setting to the default
setting.
3. Set up link aggregation or port-trunking.
Command
Parameter
Description
Switch(config-if-PORT-PORT)#
channel-group lacp
Set the selected interfaces
’ to be
aggregated via LACP.
Note : At lease 2 ports, not more than 8
ports can be aggregated.
Switch(config-if-PORT-PORT)#
channel-group lacp key [0-255]
[0-255]
Configure LACP key, 0-255.
Содержание FOS-3148 Series
Страница 108: ...108 This sets up each port s path cost The default value is 0...
Страница 182: ...182 Restart DHCP service...
