173
4.6.4 Load Factory Settings
Load Factory Setting
will set all the configurations of the Managed Switch back to the factory
default settings, including the IP and Gateway address.
Load Factory Setting
is useful when
network administrators would like to re-configure the system. A system reset is required to make
all changes effective after Load Factory Setting.
Select
Load Factory Setting
from the
System Utility
menu and then the following screen page
appears.
Click
OK
to start loading factory settings.
4.6.5 Load Factory Settings Except Network Configuration
Load Factory Settings Except Network Configuration
will set all the configurations of the
Managed Switch back to the factory default settings. However, IP and Gateway addresses will not
restore to the factory default. It is very useful when network administrators need to re-configure the
system “REMOTELY” because conventional Factory Reset will bring network settings back to
default and lose all network connections.
Select
Load Factory Setting Except Network Configuration
from the
System Utility
menu, the
following screen page shows up.
Click
OK
to start loading factory settings except network configuration.
4.7 Save Configuration
In order to save configuration setting permanently, users need to save configuration first before
resetting the Managed Switch. Select
Save Configuration
from the Console main menu and then
the following screen page appears.
Содержание FOS-3148 Series
Страница 108: ...108 This sets up each port s path cost The default value is 0...
Страница 182: ...182 Restart DHCP service...
