CTS FOS-3148 Series, Руководство пользователя

Страница: 150 / 201

150
1. Switch Port State: View current port media type, port state, etc.
2. Port Traffic Statistics:
View each port
’s frames and bytes received or sent, utilization, etc..
3. Port Packet Error Statistics:
View
each port’s traffic condition of error packets, e.g. CRC,
fragment, Jabber, etc.
4. Port Packet Analysis Statistics:
View
each port’s traffic condition of error packets, e.g.
RX/TX frames of Multicast and Broadcast, etc.
5. LACP Monitor: View the LACP port status and statistics.
6. RSTP Monitor: View RSTP VLAN Bridge, Port Status, and Statistics.
7. 802.1X Monitor:
View port status and Statistics.
8. IGMP/MLD Monitor:
View-only field that shows IGMP status and Groups table.
9. SFP Information:
View
the current port’s SFP information, e.g. speed, Vendor ID, Vendor S/N,
etc.. SFP port state shows current DMI (Diagnostic monitoring interface) temperature, voltage,
TX Bias, etc..
10. DHCP Snooping:
View the DHCP learning table, etc..
11. MAC Address Table: List current MAC addresses learned by the Managed Switch.
12. LLDP Status:
View the TLV information sent by the connected device with LLDP-enabled.
13. Loop Detection Status:
View the Loop Detection status of each port.
14. IEEE802.1q Tag VLAN Table:
View the IEEE802.1q Tag VLAN Table of the Managed Switch.
4.5.1 Switch Port State
In order to view the real-time port status of the Managed Switch, select Switch Port State from
the Switch Monitor menu and then the following screen page appears.