47
Switch(config)# management
telnet
To management the Managed Switch via
Telnet.
Switch(config)# management
telnet port [1-65535]
[1-65535]
When telnet is enabled, you can set up the
port number that allows telnet access.
The default port number is set to 23.
However, you can also identify a port
number between 1 and 65535.
Switch(config)# management
web
To manage the Managed Switch via Web
management.
No command
Switch(config)# no management console
timeout
Reset console timeout to default (300
seconds).
Switch(config)# no management ssh
Disable SSH management.
Switch(config)# no management telnet
Disable Telnet management.
Switch(config)# no management telnet port
Set Telnet port back to the default setting.
The default port number is 23.
Switch(config)# no management web
Disable Web management.
Show command
Switch(config)# show management
Show or verify current management
settings including management platform
that can be used and Telnet port number.
Management command example
Switch(config)# management console timeout
300
The console management will timeout
(logout automatically) when it is inactive
for 300 seconds.
Switch(config)# management telnet
Enable Telnet management.
Switch(config)# management telnet port 23
Set Telnet port to port 23.
Switch(config)# management web
Enable Web management.
2.6.13 Mirror Command
Command
Parameter Description
Switch(config)# mirror
destination [port]
[port]
Specify the preferred destination port
(1~48) for mirroring.
Switch(config)# mirror source
[port_list]
[port_list]
Specify a source port number or several
source port numbers for port mirroring.
No command
Switch(config)# no mirror destination
Disable port mirroring function or remove
mirroring destination port.
Switch(config)# no mirror source
Remove mirroring source ports.
Show command
Switch(config)# show mirror
Show or verify current port mirroring
destination and source ports.
Mirror command example
Switch(config)# mirror destination 26
The selected source ports
’ data will mirror
to port 26.
Switch(config)# mirror source 1-10
Port 1 to 10
’s data will mirror to the
destination (target) port.
Содержание FOS-3148 Series
Страница 108: ...108 This sets up each port s path cost The default value is 0...
Страница 182: ...182 Restart DHCP service...
