151
Port Number:
The number of the port.
Media Type:
The media type of the port, either TX or FX.
Port State:
This shows each port’s state which can be Disabled, Blocking/Listening, Learning or
Forwarding.
Disabled:
A port in this state does not participate in frame relay or the operation of the
Spanning Tree Algorithm and Protocol if any.
Blocking:
A Port in this state does not participate in frame relay; thus, it prevents frame
duplication arising from multiple paths existing in the active topology of Bridged LAN.
Learning
: A port in this state prepares to participate in frame relay. Frame relay is
temporarily disabled in order to prevent temporary loops, which may occur in a Bridged
LAN during the lifetime of this state as the active topology of the Bridged LAN changes.
Learning is enabled to allow information to be acquired prior to frame relay in order to
reduce the number of frames that are unnecessarily relayed.
Forwarding
: A port in this state participates in frame relay. Packets can be forwarded only
when port state is forwarding.
Link State
: The current link status of the port, either up or down.
Speed (Mbps):
The current operation speed of ports, which can be 10M, 100M or 1000M.
Duplex:
The current operation Duplex mode of the port, either Full or Half.
Flow Control:
The current state of Flow Control, either on or off
Содержание FOS-3148 Series
Страница 108: ...108 This sets up each port s path cost The default value is 0...
Страница 182: ...182 Restart DHCP service...
