CTE ZED 23.2 JH, Руководство по эксплуатации и обслуживанию, Страница: 36 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
34
5 MAINTENANCE
5.1 Foreword
This chapter only describes routine maintenance.
The operator can only carry out routine maintenance classified in the maintenance
summary table as “
O – by the operator ”.
The other maintenance activities classified in the maintenance summary table as “ M –
by a qualified technician ” must be carried out by qualified technical staff and in
compliance with the intervention intervals and the indications given in the manual. It is
mandatory comply with the maintenance described in order to keep the equipment in
perfect working order and to guarantee safe functioning. The execution of the
interventions after the first 100 hours, every three or six months or yearly must be
stated in the relevant section 7 (Periodic checks and maintenance) of the Control
register supplied with the machine. The Control register is a document used to record
the replacement of components of the hydraulic plant, the electric plant, structural
mechanisms or elements, safety devices as well as faults of a certain entity and
relative repairs. The Control register is considered an integral part of the machine and
must therefore accompany the same for its entire life span, until final dismantling. The
Control register must be made available for the competent surveillance bodies for a
period of five years from the date of the last recording or until the equipment is put out
of service, which ever occurs first. A document attesting to the execution of the last
check must accompany the equipment wherever it is used.
ATTENTION:
the maintenance operations not included in this chapter must be
carried out exclusively by the After-sales Service or Workshops
authorised by the manufacturer.
The overhead platform operates normally in contact with water, sand, earth etc.
Rational lubrication is necessary, which assumes vital importance not only for the
duration of machine use but also to contain its working cost.
For any clarifications, contact our after-sales service:
Service Centre
0464/485050
Before use, make sure that all envisioned maintenance has been performed and carry
out the checks indicated in the "before any use" column.
ATTENTION:
place damaged or faulty machines out of service immediately.
Carry out repairs and/or faults before further use.
The machines that have been out of service for more than three months must be
subjected to the three-monthly control before returning into service.