CTE ZED 23.2 JH, Руководство по эксплуатации и обслуживанию, Страница: 27 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
25
4.3 Using the elevated work platform
ATTENTION:
comply with the Standard in force regarding circulation when
operating in a place open to traffic, using flashing lights, acoustic and
visual signals and the appropriate signs on the ground.
OBLIGATION:
it is mandatory to cordon off the area where operations will take place.
4.3.1 Controls and checks before use
ATTENTION:
before using the machine, it is mandatory to read and understand the
user and maintenance manual.
ATTENTION:
only use the elevated work platform (EWP) for the uses declared by
the manufacturer and indicated in this manual.
Before all machine use it is mandatory:
•
check that the land is compact and suitable to support the weight of the machine
(the load per outrigger is indicated in the technical data and on the outrigger)
•
check that the land is flat or within 2° of the maximum inclination accepted
•
check the work area (
see chap. 2.5
)
•
Check if there are any obstacles or overhead lines in the work area that may hinder
or restrict machine use
•
check that there is enough fuel in the vehicle's tank
•
check that the use and maintenance manual is present, integral and legible
•
check that all stickers are present and legible (
see chap. 5.10
)
•
check the hydraulic oil level, add oil if necessary (
see chap. 5
).
•
inspect the elevated work platform (EWP), checking all the following components
and areas for damage and missing/incorrectly installed components, or oil leaks:
−
electric components, wiring and electric cables
−
hydraulic pipes, fittings, cylinders and distributors
−
fifth wheel rotation motor
−
nuts, bolts and other components used for fixing
−
cracks in welding or structural components and damage to the machine
−
Anchorage points of harness systems (cracks, wear and bolts' fastening)
−
work platform and access gate
−
end run and safety devices
−
check that the diverters for restoring level conditions are in the extension
position and the padlock is closed.
Check the correct functioning of the platform controls when climbing onto the work
platform but before moving to any height.