CTE ZED 23.2 JH, Руководство по эксплуатации и обслуживанию, Страница: 21 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
19
carrying out non-electric jobs, at net clearance deriving from the type of job,
of the tools used and materials handled, as well as lateral shifting of the
conductors owing to the action of wind and lowering of heights due to heat
conditions
.
Nominal Voltage (kV) Distance (m)
≤
1 3
1 < Tensione Nominale
≤
30 3,5
30 < Tensione Nominale
≤
132 5
> 132 7
•
The distance must be respected considering the maximum extension of the
machine boom.
•
It is prohibited to use the machine as earth in order to perform welding.
•
It is prohibited to use the machine in the event of thunder storms and in the
presence of lightening.
3.3.2 TIPPING DANGER
•
Before using the machine, make sure that the ground can support the weight of
the machine and resist the pressure of the outriggers. The maximum load is
indicated on the stickers situated on every outrigger and in the technical
specifications in the manual.
•
Only position the machine on a flat and stable surface. It is prohibited to stabilise
the machine on soft, muddy, frozen or slippery ground or in the immediate vicinity
of holes, ditches or manholes.
•
Never place the platform on other machines or structures.
•
It is prohibited to exceed the maximum inclination of the frame; the maximum
inclination accepted is indicated in the technical specifications on the plate on the
machine. Do not operate if the slope of the land or its gradient exceeds 3°.
•
It is prohibited to exceed the maximum capacity of the work platform and the
maximum number of persons allowed (capacity table in the technical data and on
the machine).
•
It is prohibited to overload the work platform when it is already at a height. If it is
necessary to disassemble parts when the platform has already been lifted,
carefully check weight to avoid exceeding maximum load.
•
It is prohibited to use the machine with wind speed exceeding 12.5 m/s (45 km/h)
or in the presence of gusts of wind.
•
It is prohibited to increase the surface or load of the platform. The increased
surface exposed to the wind decreases the stability of the machine.
•
It is prohibited to use the machine in unfavourable atmospheric conditions, in the
presence of storms, snow and fog.
•
Do not push or try to move any object outside the platform. Maximum manual
stress allowed is 40 daN.
•
It is prohibited to modify, replace or disable the components that can affect the
safety and stability of the machine.
•
It is prohibited to modify or alter the work platform. Mounting connections to
support tools or other materials on the working platform, on the deck or on the
handrail increases weight and the exposed surface of the platform and the load.
•
It is prohibited to attach metal wires, cables or similar objects to the work platform.
They could become trapped or entangled with a fixed external object.