Chapter 4. Web Configuration & Operation
330
CHAPTER 4
WEB OPERATION & CONFIGURATION
Anv:
The interval for issuing announce messages in master state.
ATo:
The timeout for receiving announce messages on the port.
Syv:
The interval for issuing sync messages in master.
Dlm:
Configure member delay Mechanism used for the port. This can be defined per port in an Ordinary/Boundary
clock. In a transparent clock all ports use the same delay mechanism, determined by the clock type.
e2e:
End to end delay measurement.
p2p:
Peer to peer delay measurement.
MPR:
The interval for issuing Delay_Req messages for the port in E2Emode. This value is announced from the master
to the slave in an announce message. The value is reflected in the MDR field in the Slave.
Delay Asymmetry:
If the transmission delay for a link in not symmetric, the asymmetry can be configured here, see
IEEE 1588 Section 7.4.2 Communication path asymmetry
Ingress latency:
Ingress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2.
Egress Latency:
Egress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2.
Version:
The current implementation only supports PTP version 2.
4.4 Monitor
This part provides monitoring statistics or data on configured functions. The user can use sub-sections of this part to
view System information, configured IP address, MAC addresses learned, etc.
4.4.1 System
4.4.1.1 System Information
The system information screen will display the configuration information, the hardware MAC address and version, the
system time, the system "uptime" and the software version and build date.
Содержание MSW-4424C Series
Страница 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Страница 382: ......
