CTC Union ERM-MUX, Руководство пользователя

Страница: 37 / 60

Chapter 5 Console Operation
37
FREE TIMESLOT IS:
E1-1: 0-31,
CURRENT CROSS:
E1-1: CROSS TIMESLOT: NULL
INPUT TIMESLOT:1-20/2:1-20
E1-1 CROSS TIMESLOT: 01-20/02:01-20,
The current status means the timeslots 1 to 20 of channel E1A1 are going to the timeslots 1 to 20 of channel E1A2.
INPUT EXAMPLE: 11-20/3:11-20, 21/3:21
[1->E1A1,2->E1A2,3->E1A3,4->E1A4, 5->E1A5, 6->E1A6, 7->E1A7, 8->E1A8]
The example means the timeslots 11 to 20 of channel E1A1 go to the timeslots 11 to 20 of channel E1A3, and timeslot 21 goes
from E1A1to E1A3.
INPUT TIMESLOT:1-20/2:1-20
After inputting timeslot crossing, the results will be displayed.
E1A1 CROSS TIMESLOT: 1-20/2:1-20,
Press 2 to clear timeslot cross of the current E1 channel, say E1A1.
CLEAR ALL CROSS SETUP,ARE YOU SURE(Y/N)?Y
Press 0 or ESC to return to the upper menu.
5.3 Set I/O card
From the main menu, press 2 to check I/O card. The display shows the slot number for each I/O card:
IO CONFIG
SEARCH.....
BOARD NO:1,2,3,4,5,6; If there are no I/O cards, "NULL" be displayed.
INPUT BOARD NO:
Input the slot number to enter the corresponding configuration menu for that card. If the selected slot is empty, then the
warning message will display:
THE NO. BOARD IS EXIT
INPUT PLEASE,AGAIN!
BOARD NO:1,2,3,4,5,6;
INPUT BOARD NO:
5.3.1 N64K/V35 card configuration
Selecting one N64K/V35 card for configuration. The console will display the current configuration and status information of
the N64K/V35 card selected.
slot 1 N64/V35 , STAT:NORMAL
The display shows the slot number, card type, card status, and status of each channel
CH1:E1-1:1-10 ,INTERNAL CLOCK,NORMAL,MARK(TD),MARK(RD)DTR:ON,RTS:ON
CH1:E1NO:NULL,DCE,INTERNAL CLOCK,NOLOOP
The status of each channel, including multiplexed E1 channel, timeslot, clock mode, loop mode are displayed
CH2:NULL,INTERNAL CLOCK,NORMAL,MARK(TD),MARK(RD)DTR:ON,RTS:ON
CH3:NULL,INTERNAL CLOCK,NORMAL,MARK(TD),MARK(RD)DTR:ON,RTS:ON
CH4:NULL,INTERNAL CLOCK,NORMAL,MARK(TD),MARK(RD)DTR:ON,RTS:O