CTC Union 588400001, Руководство по установке и обслуживанию

Страница: 29 / 44

29 CTC EcoAir 610M/614M/622M 400 V 3N~
RJ-12 RJ-45
1. System disconnected from power.
2. Energise the control (EcoLogic Pro or
EcoZenith i550 Pro) as well as the CTC EcoPart 600M
which will be numbered as Heat Pump 2 (VP2).
3. Wait approx 2 minutes until the heat pump is visible in
the “Operation data” menu.
4. Go to Installer/Settings/Heat pump 2 and the row
“Select/Rename Heat pump”. Press OK.
5. Press the arrow up until (A1)* is displayed. Press OK.
After pressing OK, (A1)* disappears and the “Select/
Rename Heat Pump” row darkens.
*In this example, we have assumed that the heat pump
is called A1, which is the factory default. If the heat pump
has already been renumbered, then select this number
instead.
6.8.4 Numbering CTC EcoPart 600M as A2
Applies to older controls with 2 connectors on the back of the
display.
1 RJ-45 and 1 RJ-12 for the CTC EcoZenith i550 Pro and
CTC EcoLogic Pro/Family.
A1 A1 A2
A1 A1 A1
40
°C
50
°C
35 °C
Driftinfo
OK
Värmepump
Kompressor Tillåten
Stopp vid utetemp °C
-22
Laddpump % 50
Välj/ Döp Värmepump
2
OK
Värmepump
Kompressor Tillåten
Stopp vid utetemp °C
-22
Laddpump % 50
Välj/ Döp Värmepump
2
A1
!
*CTC EcoZenith i550 Pro
does not control CTC
EcoAir 610M.