CTC Union 588400001, Руководство по установке и обслуживанию

Страница: 28 / 44

28 CTC EcoAir 610M / 614M / 622M 400 V 3N~
VP1 VP2 VP3
Error set Address
The heat pump could not be found and numbered.
The heat pump was not what it was supposed to be
called.
No communication with the heat pump.
Check that the heat pump is energised.
If the setting of the address fails, the latest heat pump
addresses remain. In this example VP1 and VP2.
Make sure the heat pump is energised.
Try again with a new current address.
6.8.3 Worth knowing when addressing
When all heat pumps are numbered and energised, they
should be displayed when you press the heat pump
symbol in the menu “Operation data”. If any heat pump
does not appear in the menu (communication with the
heat pump fails) It may be because it has not been
numbered as described above.
If you do not know the name of the heat pump, you can
reset the numbering by using the "Select/Rename Heat
Pump" menu (refer to points 9 and 10 above) to indicate
all possible names of the heat pump, i.e. you select and
confirm VP1 and then VP2 up to VP10 to ensure that
the correct name is given.
Finally test in the menu "Installer/Service/Function test/
Heat pump" that the respective heat pump starts.