
Page | 18
HEART RATE MODE
With the Chest Belt attached, press the MODE button
repeatedly until you are in the heart rate mode displayed by
"PULSE".
The display will show
“- -“
while the heart rate monitor tries
to “pair” with the Chest Belt.
While the chest strap is being worn, the current heart rate in the middle display
segment is shown. Otherwise,
"- -"
is shown. The heart symbol flashes if the heart
rate is being received by the chest strap. If no signal is being received anymore, the
heart symbol stops flashing and the last heart rate remains in the display.
In heart rate mode, the time is shown in the top display
segment, the current heart rate in the middle segment and
the % of maximum heart rate in the bottom segment.
The maximum heart rate is calculated automatically by
entering your personal details, such as date of birth and
weight. If these details have not been entered, the watch
reverts to the default values.
The maximum heart rate can also be entered manually in NORMAL and PRO User
Levels, see section "
BASIC, NORMAL or PRO User Levels
" / section "
TRAINING
ZONES
".
Press the SEL button in order to switch between the following sub-functions for the
display in the top segment (in this order):
Time
Stopwatch (training timer)
Time within/above/below training zone
(switch displays by pressing the SET button)
Memory
Training zones
Fitness level
Calories
Fat
CAUTION
: If the watch should not receive any heart rate in BASIC user level within
the first two minutes, the black bars
"- -"
will stop flashing. In this case, please check