CSI Wireless Seres, Справочное руководство

Страница: 79 / 134

Seres Reference Manual
59
$>JQUERY,GUIDE,YES<CR><LF>
Otherwise, it will return the following message:
$>JQUERY,GUIDE,NO<CR><LF>
5.3.13 $JRESET
This command is used to reset the SLX inside the Seres to its default
operating parameters.
This message has the following format:
$JRESET[,ALL] <CR><LF>
The ‘[,ALL]’ field is optional. When this command is issued without this
field present, the configuration only is defaulted. Please note that the
default of the SLX does not necessarily correspond with the factory setup
of the Seres.
When the ‘,ALL’ field is present (without the square brackets), the almanac
and OmniSTAR spot beam tables are also defaulted. Issuing this command
with this optional data field is not usually necessary, unless the OmniSTAR
spot beam tables have been modified incorrectly.
Caution – We do not recommend the issue of the
$JRESET,ALL<CR><LF> command under most circumstances as
it will erase any feature subscriptions from memory of the Seres.
5.3.14 $JSAVE
Sending this command is required after making changes to the operating
mode of the SLX receiver. It is possible, however, that after making
changes to the operating mode through the serial port, and later using the
menu system, that the mode becomes saved. This could occur as changes