Seres Reference Manual
27
•
Tie wrap the cable in a convenient location to ensure that if the antenna
accidentally gets bumped off that it will not get damaged.
2.6.2
Surface Mount
The Seres smart antenna is easily surface mounted requiring only two
machine screws and nuts (provided with the Seres system).
To mount the Seres antenna in a surface mount fashion:
•
Photocopy Appendix C and use the line drawing as a template to plan the
mounting hole locations.
•
Mark the mounting hole centers as necessary
•
Remove the screw plugs from the Seres antenna
•
Place the Seres antenna over the marks to ensure that the planned hole
centers agree with the true hole centers – if not, then adjust
•
Use a center punch on the hole centers in order to guide the drill bit
•
Drill the mounting holes with a 3/16” bit appropriate for the surface material
•
Place the Seres antenna over the mounting holes and insert the mounting
screws through the antenna and the mounting surface
•
Secure the Seres to the mounting surface by threading the nuts onto the
mounting screws being careful not to over-tighten.
•
Replace the screw plugs to complete the installation
•
To provide some strain relief to the cable, we recommend that you tie-wrap
the cable appropriately, providing enough slack on the cable such that it does
not pull on the gasket cable exit
The following figure is an illustration of the surface mounting procedure.
Содержание Seres
