CSI Wireless Seres, Справочное руководство

Страница: 62 / 134

Seres Reference Manual
42
4. Seres Operation
This chapter introduces the general operational features of the Seres smart
antenna, operating modes, and receiver default operating parameters.
4.1 Powering the Seres
As described in Chapter 2, Installation, the Seres is powered by connecting
the red and black power leads to a 9 to 32 VDC power source. Once
both leads are connected, the Seres will be immediately powered.
With the application of power, the Seres will proceed through an internal
start-up sequence, however it will be ready to communicate immediately.
When installed such that the Seres has an unobstructed view of the sky,
the Seres will provide a position quickly, within approximately 60 seconds
from a factory cold start. SBAS lock requires approximately 30 seconds to
acquire.
Note - It can take up to 5 minutes for a full ionospheric map to be
received from SBAS. Optimum accuracy will be obtained once
the Seres is processing corrected positions using complete
ionospheric information.
4.2 Communicating with the Seres
The Seres smart antenna features dual serial ports that may be configured
independently from each other. The ports may be configured for a
mixture of NMEA 0183, binary, and RTCM SC-104 data. The usual data
output is only required NMEA data messages.