CSI Wireless Seres Скачать руководство пользователя страница 94

Страница: 94 / 134

Seres Reference Manual

5.6.2

$JRAD,1,P

This command records the current position as the reference with which
to compute e-Dif corrections. This would be used in relative mode, as no
absolute point information is specified.

This command has the following format:

$JRAD,1,P<CR><LF>

The Seres will reply with the following response:

$>JRAD,1P,OK

5.6.3

$JRAD,1,lat,lon,alt

This command is a derivative of the $JRAD,1,P command and is used when
absolute positioning is desired.

This command has the following layout:

$JRAD,1,lat,lon,alt<CR><LF>

Where the data fields in this command are described in the following table.

Data Field

Description

lat

This is the latitude of the reference point in degrees decimal degrees.

lon

This is the longitude of the reference point in degrees decimal degrees.

alt

This is the altitude of the reference point in m.

The Seres will reply with the following response:

$>JRAD,lat,lon,alt

Содержание Seres







































































































































Результаты поиска

Содержание Seres

Отзывы:

Похожие инструкции для Seres

Бренды по названию

Популярные бренды

CSI Wireless Seres, Справочное руководство

Результаты поиска

Содержание Seres

Отзывы:

Похожие инструкции для Seres

Бренды по названию

Популярные бренды