CRZ ERZ Series, Руководство пользователя

Страница: 76 / 127

76
Start of the motorcycle
First. Start working of engine
(1) Turn the fuel tank switch to ‘ON’;
(2) Turn the electric locked switch to ‘ON’;
(3) Hang the engine to neutral.
Second. When the engine is in the "cold" state
Lift the damper switch up, pinch the clutch handle with your left hand, press the
yellow start switch with your right hand, and the throttle will rotate slightly. After
warming up, press the damper switch back to the original position.
Note: The colder the weather, the longer the engine needs to be warmed up, and the
engine will be fully warmed up to reduce engine wear.
Third. When the engine is in the ‘warm’ state
There is no need to use the damper switch just push the yellow start button.
Note:
(1) After starting, it should be preheated until the engine idle speed is stable, and
the fuel is smooth, so that it can be ridden on the road;
(2) When using the start switch button, each period should be released within 3-5
seconds, and the second start should be separated by more than 15 seconds, otherwise it
will easily cause the battery to discharge too fast and affect the battery life;
(3) After the engine is started, the start switch button should be released
immediately. When the engine is running, it is not allowed to press the start switch again,
otherwise the starter motor and is easily damaged;
(4) Ensure that the side support is completely stowed, avoiding riding hindrance
and control failure when turning left;
(5) After starting or driving, you need to turn the throttle handle smoothly;
(6) Do not start the motorcycle in a small space to avoid the danger of the exhaust
gas spread;
(7) If the clutch lever was damaged you need to change it immediately;