CRZ ERZ Series, Руководство пользователя

Страница: 116 / 127

116
Power of engine is too low
Oil filter is seriously dirty Change the oil filter
Gap of valve is too big or
small Adjust the valve gap
The exhaust system is not
sealed, deformed or the filler
in the exhaust pipe is too
small 3.
Check the exhaust system
4.
Replace the filler in the
exhaust cylinder
Something wrong with
ignition
4.
Check the ignition coil
5.
Check the electrode stator
winding
6.
Check the high voltage
package plug
The engine was stopped
while working Lack of fuel Add the fuel
Fuse blown Change the fuse
The engine is too hot
The cooling water is
decreasing in cooling system 3.
Check if the cooling
system leaks
4.
Check the cooling water
lever
Driving wind is too small Stop the engine
The heat sink is seriously
dirty Clean the heat sink
Foam formed in the cooling
system 3.
Pull out the cooling water
4.
Add the cooling water
Water pipe was bended Change the water pipe
Something wrong with the
thermal controller Change the thermal controller
Radiator fan is damaged Check the Radiator fan