Crystal AEOLUS IS-18A, Руководство пользователя

Страница: 31 / 43

27
8. Settings 8. Settings
28
70
.
0
70
.
0
25.7
70
.
0
Readjust
f: PID Parameters Set
8
4
5
10
e: Alarm Set
For settings 1,2,4, and 6 the alarm is armed when the value is set and the status is
“ON”. When the difference between the set parameter and actual parameter is larger
than the absolute value of the alarm value, then the instrument will stop running and the
function bar on the main interface will show the alarm information, and the info bar will
show “Alarm”
The % alarm is activated after 15 minutes of abnormal values CO
2
The “No Gas Alarm” activates when the instrument does not receive a gas inject CO
2
for over 5 minutes. The main interface will show alarm information.
When an abnormality occurs in the instrument, please refer to page 32 and page 33 for
details.
1. Sensor temperature for the instrument’s display temperature does not need to be set,
it displays the actual value.
2.
Readjust the temperature control parameters: When the temperature control
parameters appear abnormal through upper and lower irregular fluctuations, click the
"Readjust" button. The following prompt interface appears, if a sensor readjustment
is confirmed necessary then press "Yes". The instrument will automatically adjust its
temperature control parameters.