Crystal Vision TANDEM HD-20, Руководство пользователя

Страница: 21 / 53

Crystal Vision
Card edge operation
TANDEM HD-20 User Manual R1.4
20
24/05/2007
Card edge status
From the STATUS top menu press ENTER then SCROLL to access the status menu options.
Menu Comment
Input/Output
line Standard The Input video line standard is shown.
625, 525i, 1080i 50/59.94/60, 1035 59.94/60, 720p 50/59.94/60
Input audio
groups present Groups containing audio data present on the input video.
1234
groups contain audio. ‘-’ no audio present.
Output audio
groups present Groups containing audio data present on the output video.
1234
groups contain audio.
‘-
’ no audio present.
De-embedder
channel status Channel status of the input de-embedder A and de-embedder B.
1234
channels active.
s
channel silent.
Sub-PCB
channel status Channel statuses of any fitted sub PCB.
1234
channels active.
s
channel silent,
Na
not fitted
Embedder
channel status Channel status of the output embedder C and embedder C.
1234
channels active.
s
channel silent.
Timing
reference status Four-word composite timing reference signal is present and correct.
Ok, Err
Ancillary data
presence Ancillary data present or not within the video blanking intervals.
Presn, None.
Front sub-PCB
type Type of sub PCB fitted in the forward position.
Dip, DipR, Aip, Aop, Dop7, Dop1, None.
Rear sub-PCB
type Type of sub PCB fitted in the rear position.
Dip, DipR, Aip, Aop, Dop7, Dop1, None.
Software
version fitted The version number of the currently installed software.
PCB serial
number The electronically stored PCB serial number. This should correspond
with the serial number label affixed to the PCB connector.