Crystal Vision
Using the front control panel
TANDEM HD-20 User Manual R1.4
36
24/05/2007
Factory Reset
The factory reset can be used to return the TANDEM HD-20 to it default condition. It should
be noted that if a factory reset is carried out the final routing will depend on any sub-PCBs
fitted and all preset configurations will be erased.
Menu
Comment
Misc menu
From the home menu press F4 to access the misc menu.
Press F4 to select the factory reset menu.
Factory Reset
Press F3 to reset. The display will acknowledge that factory reset has
been completed.
Parameter
Default value
De-embedder A
Group 1
De-embedder B
Group 2
Embedder C
Group 1
Embedder D
Group 2
HANC blank
Set to Auto
No or Output Sub-PCBs
fitted
(Statesman representation)
Input Sub PCB in the front
position.
No or Output Sub-PCB
fitted in the rear position
(Statesman representation)
