Crystal Vision
Using the front control panel
SYNNER-E 3G User Manual R1.2
56
10/09/2012
Frame sequence
A useful feature of the SYNNER-E 3G is its ability to take incoming ancillary data time code
and use it to determine the field sequence of a High Definition progressive video input. This is
very useful to ensure that Dolby E has its guardband correctly positioned.
Another useful feature is the Invert output sequence; this allows the output sequence to be
swapped when using black and burst as an external reference for a progressive video input.
Note:
The ATC lock control is only active when a progressive video input is present. When
disabled the field sequence of the interlaced output will free-wheel.
Embedder pattern
The embedders can be set to give either the Sony pattern or the SMPTE pattern.
AES setup
From the STATUS top menu rotate shaft control to select the AES Setup menu. Press F1 and
then rotate the shaft control to access the AES Setup menu options. This menu is where the
AES I/O is individually configured to be either inputs or outputs.
Menu
Comment
AES1
Configuration
Rotate the shaft control to show the individual AES I/O controls.
AES1 to AES8.
Press F1 and rotate the shaft control to select.
Terminated, Hi Z, Output.
AES8
Configuration
AES
termination
Rotate the shaft control to show the AES I/O termination control.
Press F1 and rotate the shaft control to select.
Balanced, Unbalanced.
Note:
The AES format control acts globally on all AES inputs and outputs.
AES format
SYNNER-E 3G has eight AES I/O, all of which can be configured independently to be either
an input or an output. It is also possible to select globally the format to be either Balanced or
Unbalanced giving 110R differential and 75R single sided when termination is applied. Hi Z
will have an impedance of approximately 1k.
Preset controls
From the STATUS top menu rotate the shaft control to select the Presets menu. Press F1 and
then rotate the shaft control to access the presets menu options. To enter a sub menu once
selected press ENTER and use the shaft control to traverse the sub menu.
