Crystal Vision
Card edge operation
SYNNER-E 3G User Manual R1.2
38
10/09/2012
Factory reset
The user has the choice of performing a total factory reset or a partial reset. Factory Reset will
return all parameters to their factory default values and erase all user-stored configuration
presets. Selecting the Defaults option will perform the same reset to factory defaults values but
will leave any user-stored configurations unaffected.
Note:
Factory reset will erase all user-stored presets
Parameter
Default value
Mode
Synchroniser
Output Freeze
Off
Video input select
BNC
On loss of input show
Last Frame
Video delay controls
0
Output Audio Groups
Enabled
VANC Blank
Un-blanked
Tracking speed
0.05%
AES Setup
Terminated and Balanced inputs
Lock to ATC input
Free running
Invert output sequence
Normal
De-embedded Input Audio
Mono, Invert un-selected, Resample selected
AES Input Audio
Mono, Invert un-selected, Resample selected
Audio delay
Frame, User and TAD delays selected
Dolby E delay
Alignment selected
User delay
0
Embedder output routing
Group 1 to group 1…..Group 4 to group 4
AES output routing
None (AES set to inputs)
Video gains
100%
Video lift
0%
De-embedder gains
0dB
AES input gains
0dB
Embedder pattern
SMPTE
Preset selection
Preset 1
GPI control of Presets
Disabled
GPO6 Alarms
Un-selected
Silence delay
0 seconds