Crystal Vision
Using the front control panel
SYNNER-E 3G User Manual R1.2
44
10/09/2012
Dolby E insertion line
Dolby E alignment
AES Setup
Preset Control
GPO Control
When a sub menu has been selected, further options may be obtained by using the Shaft
control to SCROLL/ADJ through them. Once the desired option has been located a selection
or value change can be made by either toggling the appropriate function key or by selecting
and using the shaft control to alter a numerical value. A configuration change or value will be
activated as the shaft control is rotated or function button is toggled. The following chart
shows the available SYNNER-E 3G menus. The actual menus available may vary slightly as
software is updated.
Active control panel menus