Crystal Mountain Storm Cafe, Руководство по обслуживанию, Страница: 32 / 37

32
1. Locate a metal paper clip and bend it so that there is a long straight section (Fig. 1).
2. To clean the inlet needle, open the cooler top. Open the pod holder lid and remove the brown cup holder. Locate and
turn both red twist locks (Fig. 2) to release the pod holder assembly (Fig 3) and set aside. Snap open the catches on
either side of the Rear Housing (Fig. 4) and lift out the component.
3. While holding the Rear Housing in one hand, turn it so that the bottom of the lid can be seen easily (Fig. 76). Locate
the inlet needle in the lid
’ s center. Using a straightened paper clip, locate and gently insert it into all of the openings,
spinning and rocking to loosen any grounds clinging to the needle (Fig. 5).
4. To clean the outlet needle, open the cooler top. Open the coffee pod holder assembly (Fig. 6) and remove the brown
pod holder (Fig. 7) and set aside. Turn the red twist locks on each side to release the coffee pod holder assembly. Lift
out and set aside (Fig. 8).
Cleaning the Inlet or Outlet Needle
Fig. 1
Fig. 7
Fig. 2
Fig. 3
Fig. 4
Fig. 6 Fig. 8
Fig. 5