Crystal Mountain Storm Cafe, Руководство по обслуживанию, Страница: 26 / 37

26
Notice:
The information and/or procedures presented in the following demonstration(s) should be performed by a trained Water Cooler
Service Technician only.
Never attempt to service or repair a water cooler while it is plugged into any power supply.
Prior to any service or repair of the water cooler, ensure that the water has been completely drained from the system.
Scheduled cleaning and sanitizing are recommended to ensure the integrity of the drinking water. The frequency of cleaning
will vary depending on the conditions and environment.
Follow the steps outlined below for sanitizing the water cooler.
CAUTION: DO NOT IMMERSE THE UNIT IN WATER OR CLEAN USING PRESSURE WASHER.
1. Use nitrile gloves or wash hands before and after handling water contact parts.
2. Remove drip tray assembly and set aside for cleaning (Fig. 1 ).
3. Lift door up (Fig. 2), turn off the hot tank power switch (Fig. 3) and unplug the water cooler (Fig. 4).
CAUTION: WATER IN HOT TANK IS VERY HOT AND CAN CAUSE SEVERE BURNS. ALLOW SUFFICIENT TIME
FOR THE HOT WATER TO COOL BEFORE DRAINING (1
- 2 HOURS).
4.
T
ake bottle out from the base. (Caution: don ’ t break the corrugated tube.) Remove the connecter from adapter
(Fig. 5).
Fig. 1
Fig. 2 Fig. 3 Fig. 4
Fig. 5
Cleaning and Sanitization