Cruisers Yachts 520 Express Series, Руководство пользователя

Страница: 100 / 140

7-6
520 Express Series
520 Express Series
HOLDING POSITION

CAUTION
DO NOT shift transmission at
engine speeds above 1000 RPM.
Damage to engines or power train
could result. Momentarily pause in
NEUTRAL and allow engine to
return to idle speed before engaging
transmission.
Using throttle and shift control levers to
compensate for wind and water currents
allows you to maintain a relatively still
position in the water. Keep the bow pointed
into the wind or current, if possible, by using
the gradual turning procedure above. Slow
and equal speeds on both props will allow
you to maintain position with minor throttle
adjustments for any correction. Compensate
for slight wind and water current by
individually adjusting throttle levers and
moving shift levers between FORWARD and
NEUTRAL.
STARBOARD TURN
SLOWER PROP
PORT TURN
SLOWER PROP
CSR-159-17A
SHARP AND CLOSE QUARTERS
TURNS
A sharp turn can be achieved by putting one
shift lever in FORWARD position and the
other in REVERSE position. The rate of the
turn can be controlled by the rudder as well
as engine speed. Turning the steering wheel
in the direction of the turn will increase the
rate of turn.
Close quarters or “on-a-dime” turns can be
used to change direction in small areas.
From the hold position procedure, move the
shift levers: one to REVERSE, the other to
FORWARD. To advance your position and
quicken the turn, increase the speed on the
forward propeller. To move back from your
position and quicken the turn, increase the
speed on the reverse propeller. The optional
bow thruster can be used to maneuver the
bow to port or starboard.
Downloaded
from
Cruisers
Owners
Forum
http://www.CruisersOwnersForum.com