30
4.4
S
HUNT
-
E
NERGY
M
ODE
Data
Comment
Range
Name
This name is associated to a logo
displayed on the main page
Alternator, Solar,
Hydro, Wind
Device
Info
Serial number of the shunt,
software and hardware version.
-
Reset Ah
counter
The total ampere hour (Ah)
counter value for the source can
be read and reset (PIN Code
protected)
-
5
OPERATION
Figure 2 : Shunt #1 with additional battery (+2) and shunt #2 in Energy Mode
In
Battery mode
, the gauge indicates the current state of charge of the battery. The icon of the source and the current that is
currently flowing are also displayed. A minus sign before the amperes value indicates that the battery is being discharged. If
the current is positive, the battery is charged. Following alarms may occur:
In
Energy mode
only the symbol of the source and the actual current appear.
By pressing the circle more details about the monitored battery / energy source will appear.
Logo
Color
Alarm
Orange
Blinking
Battery capacity below the user capacity level (see section 4.3)
Red
Blinking
Critical state of charge
: battery capacity below the 20% level
Red
Permanent
Deep discharge
: battery capacity is 0%
Red
Blinking
Battery voltage above overvoltage level (see section 4.3)
Red
Blinking
Battery voltage under undervoltage level (see section 4.3)
