27
4
SET-UP
4.1
PIN
C
ODE TO ACCESS SET
-
UP
To access setup, press
on the main screen. A PIN code is required to access setup (by default 1234).
The configuration of the shunts is displayed in the setup menu with serial (SN) and identification (ID) number:
4.2
M
ONITOR
After pressing the "Monitor" symbol, the adjacent image appears. The following settings can now be made:
•
Language
FR / GB / DE / ES
•
Brightness max.
50 - 100%
•
Brightness Auto
On / Off
•
Stand by
1 - 300 seconds / Off is 0 sec.
•
Relay
see section 4.2.1
•
Alarm Buzzer
On / Off
•
Buzzer Auto Off
Off buzzer delay
•
LIN Network
see section 3.4
On page 2 the following settings are available:
•
Date / Time
Time and date settings
•
Change PIN
0 to 9999 (1234 by default)
•
Device Info
Hardware and software version
•
Load Factory data
Monitor is reset to factory status
1 : Monitor settings
(see section 4.2)
2 : Shunt #1 settings
(see section 4.3 for battery
mode)
3 : Shunt #2 settings
(see section 4.4 for energy
mode)
