14
White/Black Wires - (Dome Light Supervision):
The two White/Black
wires are intended for domelight supervision. This feature will turn on
the vehicle's domelight upon disarming the security system to illumi-
nate the interior of the vehicle. This output is identical to the White wire
output except that the polarity is selectable to be positive or negative.
CONNECTION: The fused White/Black wire is an input to the
control module. Connect this wire to 12 volts positive or chassis ground,
whichever polarity is required to activate the vehicle's domelight.
Connect the unfused White/Black wire to the vehicle's domelight
trigger wire. Usually this wire will be connected at the same point that
the Green negative or the Violet positive door trigger wire is connected.
1234567890123
1234567890123
1234567890123
1234567890123
1234567890123
1234567890123
1234567890123
1234567890123
1234567890123
1234567890123
1234567890123
1234567890123
1234567890123
1234567890123
Dome
Light
Factory Domelight Wire
10 Amp
Chassis
Ground
White/Black
White/Black
Control
Unit
Negative Dome Light