12
GRAY WIRE - (Negative Auxilary Output #1):
The function of the Gray
wire is to provide an (-)250ma auxiliary output which may be used to
operate a trunk release, car-start module, or window roll-up interface.
To activate the auxiliary channel:
Press & hold the upper Small button for 3 seconds
-The system is programmed to disarm automatically when auxiliary channel
#1 is activated.
-The Grey wire will provide a (-)ground pulse for 1 second or remain
grounded for as long as the upper Small button on the transmitter is held
pressed. (Maximum of 10 seconds)
Connection:
1) Connect the Gray wire to pin (#85) of the external relay.
2) Connect Constant (+)12 Volts to pin (#86) of the external relay. (Fused)
3) Connect pins #87, 87a & 30 as indicated in the diagram below:
Note #1: The auxiliary output can be activated anytime the vehicles
ignition key is turned Off and system is disarmed, or in Valet. The
auxiliary channel can also be activated while the vehicles ignition key is
"On" as long as a door is open. This prevents the auxiliary output from
being activated accidentally while driving.
Warning: If application requires more than a 250ma a relay must be used.
AUXILARY CHANNEL #1
P
ress & Hold The Upper Small Button For 3 Seconds.
OPERATE OPTIONAL TRUNK
RELEASE
OPERATE OPTIONAL
CAR-START MODULE
OPERATE OPTIONAL WINDOW ROLL-UPS
3
SECONDS
