39
PROGRAMMING THE 745i
2
:
Up to 4 different remote controls and 20 features may be programmed into the
security system's memory through the programing mode. To enter the
programming mode follow the three steps listed below. Once in programming
mode, Press & Release the Easy Valet switch the number of times equal to the
number of the feature to be programmed. The siren will emit a number of chirps
equal to the number of the feature to confirm that the desired feature has been
selected.
Once selected, the features setting can be chosen by Pressing the appropriate
button on the remote control. It is possible to toggle the features setting back
and forth until either a different feature is selected or programming mode is
exited. Features can be selected in any order, but it is always necessary to enter
the features number into the Easy Valet switch by Pressing the Easy Valet
switch the number of times equal to the number of the feature.
(Refer to pages
#19-21 for explanation of features)
For Example: If the user desires to program feature #15 then feature #3:
a) First enter the programming mode.
b) To access feature #15
(Automatic Rearm On/Off),
Press the Easy Valet
Switch 15 times. The siren will emit 15 chirps to confirm selection.
c) Next, Press the appropriate remote control button to choose feature #15s
setting. The siren will chirp to confirm.
d) To access feature #3
(Chirp Confirmation On/Off),
Press the Easy Valet
Switch 3 times. The siren will emit 3 chirps to confirm selection.
e) Press the appropriate remote control button to choose the feature #3s
setting. The siren will chirp to confirm.
f) Follow the same procedure to select any other feature for programming.
g) Exit programming mode when finished.
To Enter Programing Mode:
Step 1: Turn the vehicless ignition On.
Step 2: Turn the vehicles ignition Off.
Step 3: Press & Release the Easy Valet switch 5 times within 7 seconds.
-The siren will chirp to confirm entry into the programing mode.
To Exit Programing Mode:
Turn the vehicless ignition On.
- The siren will chirp to confirm exit from programming mode.
Important Note:
If at any time 10 seconds elapse without programming input,
the system will automatically exit programming mode. The siren will chirp to
confirm exit from the programming mode.