Crestron SmartPresenter SP-1, Руководство по эксплуатации

Страница: 12 / 24

CRESTRON
8
••
SmartPresenter™: SP-1 Operations Guide - DOC. 5712
Setup
SPS Equipment
Due to variations in installation requirements and overall application, not all
possible peripheral pieces of equipment are supplied with the SPS system. The table
below provides a list of equipment that can be used within the SPS system.
SPS Equipment
EQUIPMENT PART NUMBER SHIPPED WITH DESCRIPTION
Transmitter CNWM, CNWML,
CNWM/UK, CNWML/UK
All SPS
Configurations*
Wireless mouse provides user interface.
Receiver/Control
Processor SP-1, SPI-1, SP-1/UK All SPS
Configurations*
Accepts RF commands from the wireless mouse and
provides IR commands to controlled equipment.
Communication
Cable SP-CBL All SPS
Configurations*
Allows the SmartPresenter system to communicate
with a PC through the keyboard or mouse port.
Infrared Sprayer SP-MB All SPS
Configurations*
IR sprayer controls multiple IR devices by "spraying"
the defined area with IR signals.
Software Not Applicable Note 1 Allows new driver files to be retrieved and added to
the database residing in the SP-1.
Carrying Case SP-CASE sold separately Contains pre-cut foam that offers provisions for the
SmartPresenter system hardware and accessories.
External AC
Power Pack PW-1205 (domestic),
PWI-1210 (international)
SP-1, SPI-1, SP-1/UK Power pack supplies power to receiver (12 VDC).
Individual
Infrared Probe STIRP sold separately Infrared emitter that provides IR control signals sent
by the receiver.
PC Port Cable SPC-121 sold separately Cable required to control RS-232 switcher devices.
PC Port Cable SPC-122 sold separately Cable required to control RS-232 switcher devices.
PC Port Cable SPC-124 sold separately Cable required to control RS-232 switcher devices.
PC Port Cable SPC-550 sold separately Cable required to control RS-232 switcher devices.
IR/Serial Port
Cable ST-112 sold separately Cable required to control IR/serial devices.
IR/Serial Port
Cable ST-109 sold separately Cable required to control IR/serial devices.
Relay Controller SP-RY sold separately Controls devices with low voltage contact closures.
Slide Controller SP-SC sold separately Designed to interface with a Kodak slide projector.
* This includes SPS, SPSI, SPS-L, SPSI-L, SPS/UK, and SPS-L/UK.
NOTE 1: The latest version of SmartPresenter software is available from the Crestron website (www.crestron.com).
Hardware Hookup
NOTE: The SmartPresenter has been designed to work with a large variety of
devices (i.e., PCs, VCRs, projectors, etc.). Crestron recommends that the user
verifies the control functionality of devices with the SmartPresenter prior to making
a presentation. Should any anomalies arise, contact the Crestron SmartPresenter
help desk, refer to “Further Inquiries” on page 17.
The SmartPresenter has been designed as an out-of-the-box solution for many
control applications in both the rental and integrated system markets. Minimal