CRESTRON
Operations Guide - DOC. 5712
SmartPresenter™: SP-1
••
5
SP-1 Ports
A number of ports are provided on the back of the SP-1. Each has a silk-screened
label. Refer to the illustration and descriptions below.
SP-1 Ports
12 VDC .5 A (Power)
This DC power socket connector is used to supply power via the Crestron external
12VDC 500 mA power pack, Crestron P/N PW-1205 or equivalent (1000 mA
power pack for the SPI-1 and SP-1/UK configurations, Crestron P/N PWI-1210 or
equivalent).
If an external AC power pack other than the Crestron model is obtained, verify that
it meets the required specifications and polarity as shown in the table and
illustration after this paragraph.
AC Power Pack Specifications
CRESTRON POWER PACK
INPUT SPECS
OUTPUT SPECS
PW-1205
120V 60Hz
12VDC 500mA
PWI-1210
230V~50Hz
12VDC 1000mA
AC Power Pack Polarity
PC (Computer/RS-232)
This 6-pin, 6-position RJ11 modular RS-232 jack is used for driver downloading,
system configuration, and transferring commands to an RS-232 device. The pinout
for the connector is shown after this paragraph.
NOTE:
The maximum baud rate supported for device control is 38400 bps.
RJ11 Pinout
PIN
DESCRIPTION
1
CTS
2
GND
3
RXD
4
TXD
5
RTS
6
No Connection
MOUSE IN
This PS/2 connector connects to any PS/2-style mouse; offers optional pass-through
capability.