Crestron Isys TPS-5000, Руководство по эксплуатации

Страница: 20 / 56

12 Inch Tilt Touchpanel Crestron Isys™ TPS-5000
While viewing the sample of the input signal, use the double arrow buttons to the left
and then the other set of double arrow buttons to position and compress/expand the
sample so that it fills the entire screen. Also, use the
Phase Rev and Phase Fwd
buttons to adjust the timing of the sample. The Recenter button only needs to be
used if the sample disappears from the screen while making adjustments with the
double arrow buttons.
The touchpanel is capable of storing 16 VGA formats; the panel is factory set with
the presets empty. Select
SAVE Menu to open the Preset Menu, as shown below. To
assign a format to a preset, complete the following steps:
Preset Menu (Vertical Lines Portray RGB Sample)
1. Select a preset button (numbered 1 through 16 ). For the sake of this
procedure, select 11 .
2. Select the Return button in the lower right corner of the Preset Menu
to display the RGB Menu.
3. While viewing the sample of the input signal, use the double arrow
buttons to the left and then the other set of double arrow buttons to
position and compress/expand the sample so that it fills the entire
screen.
NOTE: The Recenter button only needs to be used if the sample disappears from
the screen while making adjustments in step 3.
4. While viewing the sample of the input signal, use the Phase Rev and
Phase Fwd buttons to adjust the timing of the sample.
5. If visually satisfied with the sample at this point, select the Save Menu
button. Otherwise use the buttons on the screen to make additional
adjustments.
6. If necessary, select the More Controls button to show additional
controls for RGB. At any time, the Return button can be selected to
return to the Preset Menu.
7. If visually satisfied with the sample, select the Save Preset button to
store the values of the input into the preset assigned in step 1.
Otherwise repeat steps 3, 4, and 6 to make additional adjustments.
There are two buttons on the Preset Menu that influence the storage of format
presets. Use the
Erase Selected Preset button to eliminate the stored format for the
highlighted preset. The Clear All Presets button eliminates the formats for all
presets. The touchpanel prompts the user for confirmation.
16
•
12 Inch Tilt Touchpanel: Crestron Isys™ TPS-5000 Operations Guide - DOC. 5863A