Crestron CP4-R Скачать руководство пользователя страница 165

Страница: 165 / 266

Product Manual – DOC. 8432A

Crestron Pyng OS 2 for CP4-R

•

159

Enter a descriptive name for the new shade scene in the dialog box that is

displayed.

Tap OK.

The configuration screen for the shade scene is displayed.

Shade Scene Configuration Screen

NOTE:

All of the shade groups that have been added to the chosen room are added to a

new shade scene at their current levels.

The following settings may be configured for the shade scene:

•

Use the text box at the top of the screen to edit the shade scene name.

•

Use the provided controls to adjust the levels for any shade groups that have

been added to the scene. Shade groups are adjusted in real time.

Tap the closed shade button

to close a shade load fully (0%).

Tap the open shade button

to open a shade load fully (100%).

Tap the down arrow (v) to lower a shade load incrementally.

Tap the up arrow (^) to raise a shade load incrementally.

NOTE:

Shade groups may also be adjusted using the shade motor controls or

using keypads configured to control the shade group.

Содержание CP4-R











































































































































































































































































Результаты поиска

Содержание CP4-R

Отзывы:

Бренды по названию

Популярные бренды

Crestron CP4-R, Руководство по эксплуатации продукта

Результаты поиска

Содержание CP4-R

Отзывы:

Бренды по названию

Популярные бренды