Crestron CP4-R, Руководство по эксплуатации продукта

Страница: 118 / 266

112
•
Crestron Pyng OS 2 for CP4-R Product Manual – DOC. 8432A
The following Ethernet settings may be edited in the Settings panel.
• Authentication: Tap On to turn device authentication on, or tap Off to turn
device authentication off.
If authentication is turned on, an Enable Authentication dialog box is displayed.
o Enter a username and password in the appropriate fields, and then reenter
the password. Tap OK to proceed.
o A pop-up dialog box is displayed that provides warnings about authentication
and steps for connecting to the system after authentication is enabled.
Enable Authentication Confirmation Dialog Box
o Tap OK to proceed or Cancel to cancel enabling authentication.
CAUTION: Once authentication is enabled, do not lose the username and
password required for authentication, as the Crestron Pyng system may not
be accessed without these credentials. If the authentication credentials are
lost, the CP4-R must be restored to factory defaults.
•
CIP Port: Enter the CIP port number for the CIP routing protocol.
•
Secure CIP Port: Enter the secure CIP port number for the CIP routing protocol.
•
CTP Port: Enter the CTP port number for the CTP routing protocol.
•
Secure CTP Port: Enter the secure CTP port number for the CTP routing
protocol.
•
Web Port: Enter the web port number for the hypertext transfer protocol.
•
Secure Web Port Enter the secure web port number for the hypertext transfer
protocol.