Crestron CP4-R Скачать руководство пользователя страница 125

Страница: 125 / 266

Product Manual – DOC. 8432A

Crestron Pyng OS 2 for CP4-R

•

119

The following status information is provided for each gateway:

•

If the gateway is online and detected by the system, a green network icon

shown in the box to the right of the device name.

•

If the gateway is offline or not detected by the system, a network icon with a red
x

is shown.

•

If the gateway is running an outdated firmware version that is not supported by
the system, a red computer chip icon

is shown.

•

If the system detects an issue with the gateway, a caution icon

is shown.

The following additional status information is provided for the Sonos System gateway:

NOTE:

For more information on troubleshooting the Sonos system, refer to "Appendix A:

Sonos and Crestron Pyng Integration" on page 195.

•

If the Sonos system has discovered devices from multiple households after a
device from one household has been paired, a two house icon with a red x

shown.

•

If the Sonos system is not detected by the Crestron Pyng system, a network tree
icon with a red x

is shown.

•

If the Sonos system is disabled, an unfilled house icon

is shown.

•

If a paired Sonos device is not detected by the Crestron Pyng system, a music
note icon with a red x

is shown.

Tap the gear button

next to a gateway to view and modify gateway settings and to

view all devices paired to the gateway. For more information on configuring gateway

settings, refer to "Managing Gateways" on page 41.

If an issue is found with a gateway, tap the warning button

next to the device to view

more information about the issue.

Содержание CP4-R











































































































































































































































































Результаты поиска

Содержание CP4-R

Отзывы:

Бренды по названию

Популярные бренды

Crestron CP4-R, Руководство по эксплуатации продукта

Результаты поиска

Содержание CP4-R

Отзывы:

Бренды по названию

Популярные бренды