Crestron CP4-R Скачать руководство пользователя страница 149

Страница: 149 / 266

Product Manual – DOC. 8432A

Crestron Pyng OS 2 for CP4-R

•

143

Software Update (User)

Tap Check For Updates on the User Settings screen to display the Software Update

screen.

Software Update Screen

Use the Software Update screen to check for and download software updates for the

Crestron Pyng system and for connected devices. System updates must be initiated

manually.

The system scans the cloud for software updates and shows a pop-up notification on the

user interface and setup pages when an update is available. Software downloads may

be initiated from this notification or from the Software Update screen.

Tap Download Update to update the system software if an update is available. Once

the software downloads, tap Update Software to begin the software update.

NOTE:

A software update takes up to 30 minutes to complete, and the CP4-R reboots

several times throughout the update process. Therefore, updates should be performed

when the system is not in use.

If a software update is available, tap the information button

to view release notes

for the update.

Tap Check For New Software to scan the cloud manually for software updates.

Tap Check For Device Updates to discover and install firmware updates for network

devices paired with the system. The Device Firmware Update screen is displayed.

Содержание CP4-R











































































































































































































































































Результаты поиска

Содержание CP4-R

Отзывы:

Бренды по названию

Популярные бренды

Crestron CP4-R, Руководство по эксплуатации продукта

Результаты поиска

Содержание CP4-R

Отзывы:

Бренды по названию

Популярные бренды