Crestron C2N-DB12, Руководство по эксплуатации и установке

Страница: 21 / 36

Crestron C2N-DB6/8/12 Decorator Wall Panels
Operations & Installation Guide - DOC. 6154 Decorator Wall Panels: C2N-DB6/8/12
•
17
Setting the Net ID in Device Settings
Double-click the C2N-DB12 icon in the upper pane to open the “Device
Settings” window. This window displays C2N-DB12 device information.
The NET ID can be changed in this window using the
NET ID tab, as
shown in the following figure.
“C2N-DB12 Device Settings” Window
NOTE: This procedure sets the NET ID for the C2N-DB12 in the
program only. It does not automatically set the NET ID for the wall panel
itself.
SIMPL Windows automatically changes NET ID values of a device
added to a program if a duplicate device or a device with the same NET
ID already exists in the program. Always ensure that the hardware and
software settings of the NET ID match. For NET ID hardware setting
details, refer to “Identity Code” on page 8.
C2N-DB12 Symbol in Programming Manager
Programming Manager is where programmers “program” a Creston
control system by assigning signals to symbols. The graphic on the next
page shows the C2N-DB12 symbol in the SIMPL Windows
Programming Manager.