Crestron C2N-DB12, Руководство по эксплуатации и установке

Страница: 17 / 36

Crestron C2N-DB6/8/12 Decorator Wall Panels
Operations & Installation Guide - DOC. 6154 Decorator Wall Panels: C2N-DB6/8/12
•
13
2. Connect the Cresnet cable with supplied mate to the wall
panel’s Cresnet port and the other end to the control system.
CAUTION: Excess wire pinched between the wall panel and electrical
box could short out. Make sure that all excess wire is completely inside
the electrical box and not between the box and the side of the wall panel.
3. Make sure the button unit is oriented as marked with arrow at
top, and place it in the electrical box.
4. Attach the button unit using the supplied 1 in. pan head
screws.
6. Turn Cresnet system power ON .
Programming Software
Have a
comment
about
Crestron
software?
Direct
software
related
suggestions
and/or
complaints to
Crestron via
email
(
software@
crestron.com) .
Do not forward
any queries to
this address.
Instead refer to
“Further
Inquiries” on
page 30 for
assistance.
Setup is easy thanks to Crestron’s Windows

-based programming
software. The Crestron Application Builder™ (AppBuilder) creates a
complete project, with no special programming required. Crestron
AppBuilder completes all necessary programming for a base system
including all touchpanel screens and the control system program. Once
Crestron AppBuilder creates the project, the system interfaces and
program logic can be customized. It can easily be modified with Crestron
development tools (i.e., SIMPL Windows and Crestron VisionTools
®
Pro-e (VT Pro-e) software packages).
The program output of Crestron AppBuilder is a SIMPL Windows
program with much of the functionality encapsulated in macros and
templates. Therefore, extending the capabilities of the system is very
easy. Crestron AppBuilder and SIMPL Windows are intended for users
with different levels of programming knowledge. Crestron AppBuilder is
easier to use for the beginning programmer, and much faster for all
programmers. However, it does not allow the degree of control and
flexibility that SIMPL Windows does. Of course, one can initiate
programming using the easiest method (Crestron AppBuilder) and use
advanced techniques that are available from SIMPL Windows to
customize the job.
Crestron AppBuilder comes with templates for all supported interfaces. If
a user wishes to create a touchpanel project using templates with a