Crestron C2N-DB12, Руководство по эксплуатации и установке

Страница: 16 / 36

Decorator Wall Panels Crestron C2N-DB6/8/12
12
•
Decorator Wall Panels: C2N-DB6/8/12 Operations & Installation Guide - DOC. 6154
2. From the Viewport menu, select Functions | Serial Number
ÅÆ TSID Conversion Tool . The “Serial Number ÅÆ TSID
Conversion Tool” window is displayed.
“Serial Number to TSID Conversion Tool” Window
3. Enter the serial number or TSID number as instructed; press
the appropriate button to obtain the corresponding number.
NOTE: Enter serial numbers, including spaces, exactly as they appear on
the unit label. Alpha characters in serial numbers or TSID numbers may
be entered in upper or lower case.
Installation
The following tools/hardware are required for installation:
•
Cresnet network cable (not supplied)
•
Phillips screwdriver (not supplied)
•
Two 1 in. pan head Phillips screws (supplied)
After the Cresnet network wiring has been installed and verified, use the
following procedure to install the wall panel in a standard electrical box
(refer to illustrations on page 5).
NOTE: Verify that you have sufficient Cresnet power to support your
net devices.
1. Turn Cresnet system power OFF .