Creative BLASTER PC M004 Скачать руководство пользователя

Страница: 4 / 70

User’s Manual

Information in this document is subject to change without notice and does not represent a

commitment on the part of Creative Technology Ltd. No part of this manual may be reproduced

or transmitted in any form or by any means, electronic or mechanical, including photocopying

and recording, for any purpose without the written permission of Creative Technology Ltd. The

software described in this document is furnished under a license agreement and may be used or

copied only in accordance with the terms of the license agreement. It is against the law to copy

the software on any other medium except as specifically allowed in the license agreement. The

licensee may make one copy of the software for backup purposes.

Version 1.0

August 1998

Sound Blaster is a registered trademark of Creative Technology Ltd.

Intel is a registered trademark of Intel Corporation.

Pentium™ II Processor is a registered trademark of Intel Corporation.

IBM, PC/AT, and PS/2 are registered trademarks of International Business Machines

Corporation.

Microsoft, MS-DOS, Windows, and the Windows logo are registered trademarks of Microsoft

Corporation.

All other product names or brands are trademarks or registered trademarks of their respective

owners.

Содержание BLASTER PC M004







































































Результаты поиска

Содержание BLASTER PC M004

Отзывы:

Похожие инструкции для BLASTER PC M004

Бренды по названию

Популярные бренды

Creative BLASTER PC M004, Руководство пользователя

Результаты поиска

Содержание BLASTER PC M004

Отзывы:

Похожие инструкции для BLASTER PC M004

Бренды по названию

Популярные бренды